Wood-Plastic-Composite-Decking-DD

Transforming your outdoor flooring with good quality Wood Plastic Composite decking is much easier than you think. This modern material combined with natural wood fibers and plastic offers strength to bear the weight and add elegance to the residential or infrastructure. WPC decking requires minimal maintenance and can be installed quickly without any hassle. It is a perfect choice for patios, gardens as well as pool areas. Using proper tools and following simple steps, you can create a stylish, long-lasting deck that improves the functionality and renovates the look of your outdoor area. 

Steps For Installing Wood Plastic Composite Decking

As embraced above, installation of a WPC deck is easy and you just need to follow a few steps carefully to save your time and adjust decks properly. Start by preparing the site, and cleaning the place where you want to place decks. Then, move on to installing the joist frame, lay the decking boards, and finish the final touches.

For a proper installation guide to ensure longevity and enhance the appearance of your deck, follow these steps effectively:

Prepare the Installation Area

To start the deck installation process, first clear debris, grass, or rocks to level the ground. With this, you ensure that the surface is stable for proper settlement and guarantee a secure base to prevent any risk in the future. 

  • Level the Ground: This part of the step is very crucial as it ensures the ground is even and compact enough to provide a stable base. In case of uneven surfaces, consider adding a gravel base. 
  • Mark the Area:  To create an outline of the boundaries of your deck, use stakes as well as string. A stake is a point pole that is preferred to mark the locations and so is the string used for outlining the boundary. With this, it will help you visualize the layout and keep your deck organized in a good manner. 

Build a Solid Base

It is important to know that a base or substructure forms the backbone of your deck. So, it should be sturdy and well-aligned.

  • Choose the Joist Material: A Joist is a structural element that is typically made from steel, wood, or reinforced concrete. Use this material to build a strong base.
  • Space the Joists: Place joists about 12-16 inches apart, depending on the recommendation for WPC boards.
  • Attach the Joists: Your next step is attaching the joists securely to the ground or base and making sure all of them are at the same level.

Measure and Cut Deck Boards 

Be careful during this stage of installing the Deck Boards. Cut the boards to fit the size of your deck and leave gaps for expansion. Make accurate measurements for clean cuts essential for a professional finish.

  • Measure the Deck Boards: Just determine the required length for each board and mark the cutting line consciously. 
  • Leave Gaps for Expansion: During measurements, keep a ⅛-inch gap between deck boards to allow for thermal expansion.  
  • Cut the Deck Boards: Now use a circular saw with a fine chiseled blade to achieve smoother and precise cuts. Be careful while using the tool to avoid injury.

Lay and Settle the First Deck Board 

After cutting the deck board according to the requirement, now start laying them from one edge to another ensuring proper alignment.

  • Position the Deck Board: Place the first board perpendicular to the joists and check whether it aligns with the deck’s edge. 
  • Leave Ventilation Space: For airflow, maintain a small gap of about ¼ inch between the board and walls or the structures.
  • Settle the Board: Use screws to fix the deck board in the right place. To do so, pre-drill holes to avoid cracking.

Install Remaining Decking Boards

Once you get the idea of how to install the deck board for the first time, continue laying other boards in the same order. Remember to maintain consistency in spacing and aligning the decks. 

  • Use Spacers: To ensure proper spacing, use spacers and insert them between the boards to maintain uniform gaps for drainage and expansion.
  • Align the Deck Boards: While placing decks, make sure to check alignment regularly for a neat and even appearance. 

Settle Boards to the Frames

Fasten each board properly to the joists to keep the deck in a stable position. Attach the deck boards firmly to the frame by using screws or clips. Also, keep this in mind, that not to tighten the screws too much, as it can damage your selected deck boards. 

Trim Excess Edges of Deck Board 

After laying all the deck boards, trim any overhanging edges for a clean and smooth finish. 

  • Use a Circular Saw: To trim the extra edges, again use a circular saw and carefully cut along the edge of the deck to create a straight line.
  • Smooth the Edges: Hold a sandpaper to give a polished look to the edges of deck boards.

Add Final Touches

To give final touches and make a presentation look of your deck boards, attach fascia boards or decorative covers to the sides of the deck and give it a complete look. Then, seal or cover the exposed edges to protect them from weather and other conditions.

Check and Clean Your Deck 

Finally, check that all the screws are tight and the deck boards are settled in the right place. Then, clean it using a soft brush or a damp cloth for removing dust and debris. 

Additionally, follow the proper set of instructions to install WPC decking boards to give an appealing look to your outdoor spaces. 

Another Tips for Smooth Installation and Precautions

Here are some tips for successful installation of decking boards below:

  • Follow Manufacturer Guidelines:

To ensure proper installation, make sure to adhere to the specific installation instructions provided by Deck Designer with your WPC boards.

  • Allow for Ventilation:

While fitting the deck, ensure that there is enough space under the boards for air circulation to prevent moisture buildup. 

  • Maintain Safety: 

Always wear safety gear such as gloves and goggles while working, cutting the deck boards, and so forth. 

  • Check Weather Conditions:

Try to install the deck on a dry day rather than a rainy or cloudy day to avoid moisture issues during construction.

Furthermore, by following these steps you can create a sturdy as well as attractive deck that lasts for many years with little maintenance. 

Winding Up 

Designer Deck provides high-quality Wood Plastic Composite decking that is perfect for enhancing outdoor space. By choosing us, you can enjoy a stylish and long-lasting deck that will withstand the elements while requiring minimal upkeep. With its easy installation steps and various designs available, we make it an ideal choice for anyone looking to create a visually appealing and favourable outdoor area.